InterNiche Network Integration Kit for Atmel's AT91EB55
Readme for InterNiche TCP/IP distribution, AT91EB55 project directory
This file contains the following sections
INTRODUCTION
FILES
HOW TO RUN
HOW TO TEST PPP DIRECT-CONNECT
INTRODUCTION
------------
This is a release of InterNiche Technologies' TCP/IP stack version
1.9.1, with supporting files to build it to run in the following
configuration:
Atmel AT91EB55 evaluation board
Atmel Ethernet daughterboard w/Cirrus Logic CS8900 chip
Atmel AT91-ATMEL ARM Thumb Microcontrollers board support
package (BSP), installed on hard disk from January 2002 CD-ROM
- note you should have already built the libraries,
as described on the CD-ROM in
Pages\gettingstarted\EB55\ARMADSLibraryInstallation.html
- also note you need to customize one or more of the files
as described below under the heading "Atmel BSP needs
modification"
Advanced RISC Machines' ARM Developer Suite, v1.1
Advanced RISC Machines' MultiICE debugging interface
FILES
-----
The following files are shipped in this directory:
readme.txt
webport.axf
HOW TO RUN
----------
Download the resulting webport.axf to the AT91EB55 board using the
ARM AXD debugger:
a) connect a serial terminal (9600 bps, no parity, 1 stop bit)
to the Serial B connector
b) connect the board to your local Ethernet
c) turn the board on
d) start the ARM Multi-ICE server
e) start the ARM AXD debugger
f) select System Views|Debugger Internals from the menu
g) set "$top_of_memory" to 0x2040000
h) select File|Load Image from the menu
i) locate the built webport.axf and open it
j) press F5 twice to start execution
The default IP address for the Ethernet interface is 10.0.0.112.
The Web server should be accessible with any frames-capable web
browser.
*************************************************************************
Thank for evaluating the Time Limited 1 hr Interniche TCP/IP Web Server,
FTP Server and Telnet Server Demo
Please contact www.iniche.com or sales@iniche.com for more information.
